Precor Discovery Series Prone Leg Curl DSL 606

SKU: DSL606

Easy entry onto the Discovery™ Series Selectorized Line Prone Leg Curl allows users to align their knee joint with the pivot for proper exercise mechanics. The ankle roller pad adjusts for varying leg lengths and ensures smooth, optimal resistance.

Open Design
The Prone Leg Curl features an open design that allows for easy entry, ensuring the user aligns their knee joint with pivot for proper exerciser mechanics

Adjustments
The ankle roller pads easily and quickly adjust to match any leg length of the users.

Ergonomic Pad Design
The angled pad helps ensure proper position, minimizing stress on the lower back.

Specifications:

  • Length: 61 inches / 155 cm
  • Width: 48 inches / 122 cm
  • Height: 59 inches / 150 cm
  • Equipment Weight: 497 lbs / 225 kg
  • Incremental Add-on Weight: 5 lbs (2.3 kg)
  • Weight Stack: 200 lbs / 91 kg
  • Workout Area (L x W): 47 L x 61 W inches / 119 L x 155 W cm
  • Instructional Placard: Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.
  • Weight Stack: Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.
  • Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position.
  • Upholstery: Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.
  • Adjustments: Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.
  • Water Bottle and Accessories Holder: The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.
  • Frame and Finish: The frame is 11 gauge (.120 in) 2×4″ electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.
  • Bearings and Pivot Points: Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.
  • Pulleys and Cables: Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7″x19″) aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.
  • Bolt Down Capability: Yes
  • General Features: Easy entry allows user to align knee joint with pivot for proper exercise mechanics. Ankle roller pad adjusts for varying leg length.
  • Standard Shroud Color: Pacific Blue, Black, Dark Cavern
  • Standard Upholstery Colors: Black, Mahogany, Imperial Blue, Paprika, Graphite, Royal Blue, Slate, American Beauty Red, Terra Cotta
  • Standard Frame Colors: Gloss Metallic Silver, Metallic Ash, Desert Bronze, Black Magic Gloss, Gloss White