Precor Discovery Series Shoulder Press DSL 500

SKU: DSL500

The Discovery™ Series Selectorized Line Shoulder Press delivers targeted movement with a movement arm that is counter-balanced with a rear-set pivot designed to create a proper motion path and low starting lift weight. The ratcheting gas-assisted seat adjusts to fit a wide range of users.

Ratcheting Seat
The unique ratchet adjustment fits all users and allows the seat to be easily adjusted from the start position.

Multi Grip Handles
The various grip options allow for a wide range of user start positions and exercise variety.

Counter-Balance
The counter-balanced movement arm creates a proper motion path and low starting lift weight.

Specifications:

  • Length: 67 inches / 170 cm
  • Width: 52 inches / 132 cm
  • Height: 59 inches / 150 cm
  • Equipment Weight: 538 lbs / 244 kg
  • Incremental Add-on Weight: 5 lb (2.3 kg)
  • Weight Stack: 200 lbs / 91 kg
  • Workout Area (L x W): 67 L x 52 W inches / 170 L x 132 W cm
  • Weight Stack: Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.
  • Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position.
  • Upholstery: Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.
  • Adjustable Seat: Yes, gas-assisted ratcheting seat adjustment.
  • Adjustments: Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.
  • Instructional Placard: Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.
  • Bearings and Pivot Points: Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.
  • Water Bottle and Accessories Holder: The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.
  • Pulleys and Cables: Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7″x19″) aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.
  • Frame and Finish: The frame is 11 gauge (.120 in) 2×4″ electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.
  • Bolt Down Capability: Yes
  • General Features: Movement designed to create optimal motion path. Ratcheting gas-assisted seat adjusts to fit wide range of users.
  • Standard Shroud Color: Pacific Blue, Dark Cavern, Black
  • Standard Upholstery Colors: Black, Mahogany, Imperial Blue, Paprika, Graphite, Royal Blue, Slate, American Beauty Red, Terra Cotta
  • Standard Frame Colors: Gloss Metallic Silver, Metallic Ash, Desert Bronze, Black Magic Gloss, Gloss White